Pre Engineered Buildings

We are Leading Manufacturer and Supplier of Pre-Engineering Building Structure Work, Roofing Sheet, Accessories and Air Ventilator, PUF Panels.

Ability to span long distances:-

Clear Spans up to 60 mtrs. without internal columns are possible in case of Pre-engineered Buildings. The structure is cost effective. Length is not a constraint.

Flexibility in Building Dimensions

The building could be designed as per the specific customer requirement in terms of Length, Width, Height and load Bearing capacity. Tailor made structure enables optimization of cost without undue spending on heavy structure without the need for the same.

Easy Expansion:-

In case of well defined plan in advance, it is possible to have expandable frames which will provide for future expansion, thereby allowing cost spreading over a longer period.

Maintenance-free Exteriors

Leakage proof Roofing and Cladding made from 550 mpa high tensile steel coated with Zinc, Aluminium and Silicon Alloy (Galvalume Sheets) for maintenance free exteriors. Also the structure is coated with high quality protective coatings to ensure long maintenance-free interiors and exteriors.

No On-site Fabrication

The primary and secondary structure are fabricated and prepared at SB Plant and transported to customer site in knocked down conditions. The experienced erection team from SB will erect the structure at customer site without any welding operation at site.

Design Accuracy

The designing and drafting of SB Pre-engineered Buildings is carried out on sophisticated softwares to ensure accuracy of design, development and execution.

Stringent Quality Assurance standards

SB Enterprise follows its Quality System which ensures stringent Quality System in place for Design, Production and erection of Sb Building Systems.

Faster Project Execution

The concept of Pre-engineered Building is based on use of Standards. Right from Design to manufacturing to Erection, standardization of activities make it faster for us to execute a project faster by 30 % of the time it takes to execute a conventional engineering project.

Cost Efficiency

The foundations of Pre-engineered Buildings are lighter compared to conventional buildings and also less in number as it is possible to have a wider clear span building.

Adherence to International Standards

Building designed and manufactured in accordance with Internationally accepted Standards and Codes like MBMA (Metal Building, Manufacturers’ Association, AISC (American Institute of Steel Construction Inc. USA) and AISI (American Iron and Steel Institute, USA.

High Aesthetic Appeal

Highly qualified design team from SB Enterprise provides various options for designing of structure and also the exteriors of the premises. Accordingly, it is possible for customer to visualize the appearance of the premises even at the concept stage.

Provision for Industrial Ventilation

SB Enterprise also manufactures the range of Industrial ventilation solutions which are meant to meet the requirements of Air Ventilation and Natural Light provision. These products are suggested and integrated in the building quote at a very competitive rate making the package complete in all regards.

In-house procurement of Goods and Services to ensure consistency

SB Enterprise operates on philosophy of creating value and hence has all the major services and components produced in-house. The design, development, manufacturing of primary structure, secondary structure, roofing & cladding systems, hardware components, ventilation products and erection of the building systems are carried out by SB Enterprise. This ensures adherence to standards set and also helps honouring the timeline commitments with ease.

Our Pre-engineered Buildings structures are suitable for a wide range of purposes

Manufacturing Units / Factories , Warehousing Units Supermarkets, Service Stations Restaurants Sports Complexes Shopping Malls Site Offices Exhibition Halls, Toll Plaza Auditoriums Aircraft Hangers, Retail Outlets, Residential Premises.

Building Width :(BW);- BW is defined as the distance from outside of eave strut of one side wall to outside of eave strut of the opposite side wall.

Building Length :(BL):- BL is defined as the distance between the outside flanges of end wall columns in opposite end walls. The length covers various bay lengths.

End Bay Length :(EBL):- EBL is the distance from outside of the outer flange of end wall columns to centre line of the first interior frame column.

Interior Bay Length :(IBL):- BH is defined as the distance from bottom of the main frame column base plate to the top outer point of the eave strut. When columns are recessed or elevated from finished floor, eave height is the distance from finished floor to top of eave strut.

Building Height :(BH):- IBL is defined as the distance between the centre line of two adjacent interior main frame columns. Most common bay spacings range from 6 metres to 7.5 metres.

Design Loads :(DL):- Unless otherwise specified, DL considered for SB Enterprise are designed for the following minimum loads:

Roof Live Load:- 0.57 kN/m2

Design Wind Speed:- As per IS : 875 for location

Design for Snow Loads, Seismic loads, collateral loads or any other local condition need to be specified at the time of designing of the Building. Loads are applied in accordance with the latest American codes and standards applicable to Pre-engineered Metal Buildings unless specified otherwise at the time of designing of the Building.The angle of the roof with respect to the horizontal is termed as RS. The most common roof slope is 1/10. However, Building can be designed with any practical roof slope.

Roof Slope(X/10) :(RS)

The angle of the roof with respect to the horizontal is termed as RS. The most common roof slope is 1/10. However, Building can be designed with any practical roof slope.